Home Cycling Specialized S-Works Aethos 2 review

Specialized S-Works Aethos 2 review

by
Specialized S-Works Aethos 2 review

In a world forcing the aerodynamic performance narrative, the Specialized Aethos is a breath of fresh air, eschewing the mainstream dropped seatstay and deep headtube configurations of contemporary road bikes for classic double-diamond architecture. The first-generation Aethos, launched in 2020, was a hit among purists and, in many ways, close to the best lightweight bike in terms of rider enjoyment – perhaps even perfect.

Specialized was careful not to lose those attributes with the new model, but was also keen to modernise the platform, which now gains an integrated cockpit, wider tyre clearances, subtle tweaks to the geometry and a carbon layup inspired by the S-Works Tarmac SL8 race bike.

Despite these alterations, the lightweight ethos and character of the original Aethos remain unchanged, as does the exorbitant sticker price of the S-Works derivative. As expected from a Halo bike, it gets all the bells and whistles, but is there anything to be gained or lost looking further down the range?

The head angle of the Specialized S-Works Aethos 2 has been slackened from 73 to 72.5 degrees, while the wheelbase has grown 14mm to 992mm

(Image credit: Richard Butcher)

UDH dropout, internal hosing, and increased stack height, the Aethos employs a Tarmac SL8-inspired layup with new tube shapes and ply placements that take up structural loads. The new frame is just 10g heavier than its forebear at 595g. The total system weight in SRAM Red AXS guise comes in at 5.98g in size medium, with tubeless tyres (and sealant) fitted. Despite its feathery intentions, it loses out to the 5.88kg Scott Addict RC Ultimate in the same size, but trumps the 6.3kg Cannondale Lab71 SuperSix Evo SL.

Latest Videos From

Specialized S-Works Aethos 2

The front end uses a Roval Alpinist Cockpit II with totally hidden hoses

(Image credit: Richard Butcher)

Despite the subtle changes to the tube shapes, some will find it difficult to tell the Aethos 2 apart from its predecessor, but to me, that’s a good thing. I appreciate the classic lines and clean silhouette that have all but disappeared from the pro peloton. The range-topping S-Works Aethos 2 is available in two colourways, depending on your groupset persuasion: SRAM Red AXS builds come in ‘Red Tint’, and Shimano Dura-Ace Di2-equipped models are painted in a pastel turquoise called ‘Fjord Metallic’.

The frame angles are not too different from those of the previous-generation Aethos. In size 54cm, the reach is identical at 384m, but the stack has increased from 544mm to 559mm. The head angle has been slackened from 73 to 72.5 degrees, while the wheelbase has grown 14mm to 992mm. While the chainstays remain at 410mm, the most notable change is an increase in tyre clearance from 32mm to 35mm, essentially future-proofing the platform for years to come.

Specialized S-Works Aethos 2

At the heart of the S-Works Aethos 2 lies a SRAM Red AXS groupset with a 48/35T, 11-33T chainset and Quarq power meter

(Image credit: Richard Butcher)

Roval Alpinist Cockpit II with totally hidden hoses. The balance is rounded off with Supacaz bar tape, a SRAM DUB BSA 68 bottom bracket and S-Works Power with Mirror 3D-printed saddle.

Specialized S-Works Aethos 2

With a system weight of 5.88kg (6kg with pedals), the hills and mountains are its natural habitat; it’s pretty decent on the flats, too

(Image credit: Aaron Borrill)

Source link

You may also like